Your decorative wire mesh solution
Wovenpanelᵀᴹ can be used widely throughout your designs, from intricate design highlights to large-scale applications to create an extraordinary and bespoke aesthetic.
With over 100 years of experience in producing woven and welded mesh, Wovenpanelᵀᴹ sheets are manufactured in USA using the finest base materials and advanced finishing processes enabling a collection that is superior in quality and diverse in its finishes.
WOVENPANELᵀᴹ is a trademark of Archant Ltd. All rights reserved.
A decorative woven wire mesh range
for architects and interior designers.
Range of styles stocked in NZ, 100’s more available
Archant Wovenpanel™ is available in a wide range of styles and finishes. With many products stocked in New Zealand and 100's more available, you can guarantee we have a Wovenpanel™ suitable for your design.
Our Wovenpanel™ range includes large mesh sizes through to fine mesh sizes and even includes opaque mesh.
Freedom in design application
The only limitation is your imagination
Our Wovenpanel range has hundreds of application options from room dividers, statement fireplace, ceiling details, benchtop cladding and many more.
Bespoke fabrication & installation
Archant provides an end-to-end fabrication and installation offer to ensure you have peace of mind that your Wovenpanel™ will be fabricated and installed to the highest quality. Simply send us your design drawings to quote and once accepted, we will cut the Wovenpanel™ to size and work with a preferred installer in your area to install your Wovenpanel™.
View our full range of Wovenpanel™ products, available in a variety of finishes, weaves and sizes.
How to use Wovenpanelᵀᴹ in your design
Archant provides an end-to-end fabrication and installation offer to ensure you have peace of mind that your Wovenpanelᵀᴹ will be fabricated and installed to the highest quality. Simply send us your design drawings to quote and once accepted, we will cut the Wovenpanelᵀᴹ to size and work with a preferred installer in your area to install your Wovenpanelᵀᴹ.
1. Choose your Framing Option
Archant offers four standard framing options for architectural installation. These are manufactured from steel and fabricated to match the thickness of the mesh.
Standard Angle Iron: This option involves welding the wire mesh to the backside of the Angle frame. This is only suitable for thicker mesh styles.
Bar & Angle: This option is a non-welded solution that is better suited to smaller mesh styles.
Wrapped Angle Iron: This option is best for tight and more opaque mesh styles with thin wiring. This is also suited for aesthetics where a frameless appearance is desired.
U-Edge: This is the most common way to provide a safe and economical perimeter edge around a wire mesh panel. Archant has access to a range of U-Edge widths to best suit your design and mesh style. The U-Edge is easy to work with and can be used for a range of our Wovenpanel mesh patterns and spacings.
2. Request a quote
Upload your design drawings or concepts for our Wovenpanelᵀᴹ specialist team to prepare a project proposal for you. Please include as much detail as possible in your designs to allow us to provide you with an accurate quote and recommendation. You can select your mesh style and preferred framing option when submitting plans.
3. Receive your Project Proposal
Using your design drawings, one of our Wovenpanelᵀᴹ specialists will calculate the amount of material required and the cost of fabrication and installation (if required) to provide you with an installed quotation. This quotation will be prepared in the project proposal which may also include recommendations on how we can optimise the material usage or design to achieve the best result for your project.
4. Approval & Fabrication
Once your design has been finalized and the project proposal approved, we will begin the fabrication and installation process. This may include conducting a site visit to measure, cutting the mesh to size, fabricating the frames, and delivering and installing the Wovenpanelᵀᴹ. During the process, you will be kept updated on the project progress to ensure you are completely satisfied with the fabrication and installation of your Wovenpanelᵀᴹ mesh.
Our Wovenpanel™ Single Samples and Sample boxes are available to purchase from our website. You can also view these samples or full sheets for free in our Showrooms or via our sales team.
If you would like to view these samples please contact us to request a Wovenpanel™ Demonstration Presentation from our experts
Request a quote for your next project
Archant provides an end-to-end fabrication and installation offer to ensure you have peace of mind
that your Wovenpanelᵀᴹ will be fabricated and installed to the highest quality.